Shutoff valve / angle stop (each) — Schaumburg & the NW suburbs
Real pricing for shutoff valve / angle stop (each), from the same price book BootsOnCall’s pros quote from.
100% of our contractors are background-checked and insurance-verified. Every job carries a 12-month workmanship warranty — if it fails within a year, we put it right at no charge.
Insured local pros, vetted in person. A checked, insured pro texts you their name and when they’ll arrive.
Price
| Job | Price range | Anchor |
|---|---|---|
| Shutoff valve / angle stop (each) | $165–$235 | typical $195 |
Final price is confirmed before any work starts. If a pro opens it up and finds something the photos didn’t show, you hear the new number before the work starts. Never after.
Angle stop replacement: fixing leaking or stuck shutoff valves
An angle stop is the small shutoff valve on the wall or floor beneath a sink or behind a toilet. It is there so you can turn off the water to a single fixture, and it is one of the most useful and most neglected parts of a plumbing system. When one leaks, drips or will not turn, it needs replacing before it fails at the wrong moment. This guide covers the signs, the causes, and what a replacement visit involves.
Signs an angle stop needs replacing
The most common sign is a drip or a slow leak from the valve stem or the connections, often seen as a damp patch, a crusty white or green deposit, or a stain on the cabinet floor. A valve that will not turn, or turns but does not fully stop the water, has done its job for the last time. Handles that spin loosely, or a stem that feels gritty, point to internal wear.
Other clues include corrosion on the body, rust marks, or a valve that is very old. In many houses these valves have not been operated in decades. Give the handle a gentle test only if you are prepared for it to leak, since old valves can start to weep the first time they are moved.
If a valve is actively spraying or leaking heavily, close the main water shutoff for the house and call promptly. A steady drip under a cabinet is easy to overlook, but it can quietly damage the cabinet and floor.
What causes angle stops to fail
Age and disuse are the main culprits. Internal rubber washers and seals harden and crack, and the stem packing dries out. Valves that are rarely turned build up mineral deposits, and hard water, common in this part of the country, encourages scale inside the body, which stops the valve closing properly or makes it seize.
Corrosion is another cause. Brass and chrome valves can corrode, especially where moisture lingers under sinks, and the connections may weep as the metal deteriorates. Over-tightening during earlier work can also damage the valve. Multi-turn valves, the older style, wear more than quarter-turn types, which are more durable.
Movement and vibration from repeated use can loosen the compression fittings over the years. A valve that has started to leak once often keeps doing so, and tightening it may only postpone the problem.
What the visit involves
The visit is scoped per valve, for an accessible angle stop, meaning one the plumber can reach under a sink or behind a toilet. To begin, the water to the home or the affected branch is shut off, since the old valve cannot be relied on to do it. The supply line is disconnected, and the old valve is removed.
The method depends on how the valve is connected to the pipe. A compression valve is unscrewed from the pipe and replaced with a new one, with a fresh compression fitting. A soldered valve is more involved, since it has to be cut off and a new one fitted, which may require different tools and more care around the surrounding pipe. The plumber will tell you which you have. A new quarter-turn valve is generally the choice, and a new supply line is often fitted at the same time.
After installation, the water is turned on slowly, the new valve is opened, and every connection is checked for leaks. The plumber operates the valve to make sure it opens and closes freely. If the valve is not accessible, for example behind a fixed panel or inside a wall, the job changes, and the plumber will discuss it with you first.
What moves the price within the range
The price is set per valve, so a job with several valves scales with the number. A compression valve on a straightforward copper line sits at the lower end. Soldered valves, awkward access and corroded piping take more time.
When the plumber opens up the connection, they may find that the pipe itself is in poor condition. Brittle, corroded or damaged pipe can make a simple swap into a repair of the supply piping, which would be agreed before it is done. Old flexible supply lines that are cracked or kinked are usually replaced at the same time.
If you are replacing angle stops at several fixtures, tell the plumber. Doing them all in one visit is often more efficient, and the house water is only shut off once. Photos of each valve and the space around it help the plumber prepare.
Replace the valve, or tighten and hope?
A small tightening of the packing nut sometimes stops a slow drip at the stem, and it can be worth trying once. But a valve that leaks at the body, will not close or is badly corroded should be replaced. Repairing a failing valve is a temporary measure at best.
If you are already having other plumbing work done, such as a new faucet or toilet, it makes sense to replace old valves while the water is off. A good working shutoff at every fixture pays off the next time something needs repair, because you can isolate one fixture without turning off the whole house.
Common questions
What is an angle stop?
It is the small shutoff valve on the wall or floor under a sink or behind a toilet, letting you turn off water to that fixture alone.
Is the price per valve?
Yes. The visit is scoped per valve, for accessible valves. Several valves can be done in one visit.
Why does the whole house water need to be turned off?
The old valve cannot be relied on to stop the water, so the plumber shuts off the supply upstream before removing it.
What if my valve is soldered?
It can still be replaced, but the work is more involved than a compression valve. The plumber will explain which you have and what it involves.
Can I just tighten a leaking valve?
Tightening the packing nut can stop a small drip at the stem. A leak at the body or a valve that will not close needs replacing.
Text us anytime — we answer right away; emergency visits as soon as a pro is available.
Booking 7 AM–9 PM, every day.
Get an estimate → Request a callbackOther jobs we handle
- Water heater repairtypical $225Water heater replacementtypical $1,100Tankless water heater flushtypical $195Leak repair visittypical $295Shutoff valve / angle stop (each)typical $195
Towns we serve
- Schaumburg (60193, 60194, 60195)
- Hoffman Estates (60169, 60192)
- Roselle (60172)
- Streamwood (60107)
- Rolling Meadows (60008)
- Hanover Park (60133)
- Elk Grove Village (60007)
- Inverness (60067, 60010)
- Palatine (60067, 60074)
- Arlington Heights (60004, 60005)
- Barrington (60010)
- Mount Prospect (60056)
- Prospect Heights (60070)
- Des Plaines (60016, 60018)
- Buffalo Grove (60089)
- Wheeling (60090)
- Lake Zurich (60047)