Water heater replacement — Schaumburg & the NW suburbs
Real pricing for water heater replacement, from the same price book BootsOnCall’s pros quote from.
100% of our contractors are background-checked and insurance-verified. Every job carries a 12-month workmanship warranty — if it fails within a year, we put it right at no charge.
Insured local pros, vetted in person. A checked, insured pro texts you their name and when they’ll arrive.
Price
| Job | Price range | Anchor |
|---|---|---|
| Water heater replacement | $935–$1,320 | typical $1,100 |
Final price is confirmed before any work starts. If a pro opens it up and finds something the photos didn’t show, you hear the new number before the work starts. Never after.
Water heater replacement: swapping a 40 to 50 gallon tank
A tank water heater rarely gives a long warning before it fails, and when it does, the result can be a flooded utility room. Replacing one is a well-understood job, but there are decisions to make before the day: which unit, whether a permit is needed, and how old fittings and venting will be handled. This guide covers the signs that a heater is at the end of its life, what a swap visit involves, and what can change the scope.
Signs your water heater is at the end of its life
Age is the first clue. A tank heater that has been in service for a decade or more is living on borrowed time, and the label on the unit usually shows the manufacture date in the serial number. Other signs include water leaking from the tank body or pooling around its base, rusty or discolored hot water, rumbling or popping noises, and a steady loss of hot water capacity. If you need to repair the same unit more than once, that is another hint that replacement is nearer than you think.
A leak from the tank itself is the clearest signal. Fittings and valves can be repaired, but once the steel tank has rusted through, nothing can fix it. If you find water around the heater, turn off the water supply to the unit, switch off the power or gas, and keep the area clear until it is dealt with.
If you smell gas at any time, leave the house and call your gas utility from outside. Do not attempt to relight or switch anything.
What to decide before the visit
The visit is scoped as a swap of a standard 40 to 50 gallon tank heater, labor only. That means you supply the new heater, and the plumber removes the old one and installs the new one. The price does not include the cost of the unit itself.
Choose the same fuel type as the existing heater, gas or electric, unless you are planning a bigger change. Match the size to your household. A 40 gallon tank suits a small household, while a 50 gallon tank suits larger ones. The dimensions matter too, since a taller or wider tank may not fit the space, the vent connection or the existing piping.
A permit is usually needed for a water heater replacement, and many villages and cities in the Chicago area require one. The permit is extra to the labor price, and requirements vary by municipality, so it is worth asking your local building department. The plumber can explain how it works when you book.
Clear the space around the heater so the old unit can be removed and the new one brought in.
What the visit involves
The plumber shuts off the water supply and the gas or power, then drains the old tank and disconnects the water lines, the vent and the gas or electrical connection. The old heater is moved out of the way, which can be heavy work, especially on stairs.
The new heater is placed on its pad or pan, leveled, and connected to the hot and cold lines, usually with new flexible connectors. A gas unit is connected to the gas line and the vent, and the connections are checked for leaks. An electric unit is wired to the existing supply. A temperature and pressure relief valve and its discharge pipe are fitted, and an expansion tank may be needed depending on your system.
Once the tank is filled and all air has been purged from the lines, the plumber lights or powers the unit, sets the temperature and checks that it heats properly. They check the venting for correct draw, look over all connections and explain the controls. The plumber will tell you if any part of the existing setup is unsafe or out of date.
What moves the price within the range
The range is for a like-for-like swap in a location with good access. A heater in an open basement with modern fittings sits at the lower end. Tight closets, attic installations and stairs make removal and installation slower.
Existing connections matter. Corroded or old shutoff valves, rigid copper that has to be modified, galvanized piping, a failing vent or an out-of-date gas connection add work. Code changes since the last install can also add requirements, such as a drain pan, seismic strapping in some places, an expansion tank or updated venting.
The permit is a separate fee. Hauling away the old heater may be included or itemized separately, so ask when booking. Photos of the existing heater, its label, and the surrounding piping and vent help the plumber prepare the right parts and judge what might be needed.
Repair the old heater, or replace it?
If the tank is sound and the problem is a single part, a repair is often the more economical option, especially for a younger unit. If the tank leaks, or the unit is old and has multiple problems, replacement is the sensible route.
This is also the moment to consider your wider choices. A tankless unit or a larger tank is a different project with different requirements and its own pricing. If you are considering an upgrade, ask before the visit so it can be planned properly.
Common questions
Do I buy the water heater?
Yes. The visit is labor only for a standard 40 to 50 gallon tank. Choose a unit that matches your fuel type and fits the space.
Is a permit required?
Often yes, and many municipalities in the Chicago area require one. The permit is charged in addition to labor, and requirements vary by location.
What if my heater is leaking from the tank?
A leaking tank cannot be repaired. Turn off the water supply and the power or gas to the unit, and keep the area clear until it is replaced.
Can the old piping affect the job?
Yes. Corroded valves, old connectors or venting that no longer meets current requirements may need replacing, and the plumber will explain anything extra before doing it.
Does this cover a tankless heater?
No. This visit is for a standard tank swap. A tankless installation is a different project with its own scope.
Text us anytime — we answer right away; emergency visits as soon as a pro is available.
Booking 7 AM–9 PM, every day.
Get an estimate → Request a callbackOther jobs we handle
- Water heater repairtypical $225Water heater replacementtypical $1,100Tankless water heater flushtypical $195Leak repair visittypical $295Shutoff valve / angle stop (each)typical $195
Towns we serve
- Schaumburg (60193, 60194, 60195)
- Hoffman Estates (60169, 60192)
- Roselle (60172)
- Streamwood (60107)
- Rolling Meadows (60008)
- Hanover Park (60133)
- Elk Grove Village (60007)
- Inverness (60067, 60010)
- Palatine (60067, 60074)
- Arlington Heights (60004, 60005)
- Barrington (60010)
- Mount Prospect (60056)
- Prospect Heights (60070)
- Des Plaines (60016, 60018)
- Buffalo Grove (60089)
- Wheeling (60090)
- Lake Zurich (60047)